Installing gearbox and torque tube.
This is fairly straight-forward. I bolted
the torque tube to the gearbox, attached the shifter mechanism
and install both as one unit.
 
Then slid the box under the car and lifted it up into place.
Then tied it up with my mod_seatbelt & supported the
bell-housing end with blocks of wood.
 
The gear stick should come up in the right spot.
 
top | remove
auto trans | modify
firewall
cut shifter
mount | transfer
rear suspension | install
gearbox
install rear
suspension | mount
clutch | wiring
| back
|
